Puedes seguirnos en

BUSCADOR

Engineering

De-multiplexing of AD0 – AD7 of 8086

de-multiplexer 8085
de-multiplexer 8085

In the 8085 microprocessor, the higher order address lines are directly available, but the lower order address lines are multiplexed with data bus in time sharing. Hence, the de-multiplexing of address/data bus is required for separation of address and data bus.

In earlier clock cycle state of every machine cycle, the content on AD0 – AD7 is the lower order address from A0 to A7 and the LE also goes high. Later clock cycle state, the 8085 remove the content of AD0-AD7 lines and use same lines as a data lines for next clock cycle state onward.

Hence, the de-multiplexing of address/data bus can be implemented by using tri-state octal latch 74LS373 and this latch can be controlled by using ALE signal of 8085. When ALE goes high, the address signal will be latched in the octal latch 74LS373 and output of the latch will be provided on A0-A7.

De-multiplexing

When ALE goes low, the latch will be disabled and the AD0-AD7 can be used as data bus D0-D7.

Anuncio publicitario

Escrito por

Administrador de ENGGDRCAOS. Canal dedicado especialmente a la formación del estudiante que aspira a ser ingeniero. Todos los videos son Ingles. Apasionado del universo Apple, estudiante de Ingeniería y Gamer por vocación.

Publicidad

ARTÍCULOS RELACIONADOS

Ciencia y tecnología

En el día de hoy la gran compañía Intel ha mostrado durante la Maker Faire 2013 una pequeña placa base de desarrollo, con la...

Ciencia y tecnología

Intel una de las empresas estrellas en la fabricación de hardware para PC ha anunciado en el día de hoy mediante un comunicado de...

Ciencia y tecnología

Intel la marca estrella en lo que ha fabricación de procesadores se refiere ha optado por darle un nuevo toque al empaquetado de sus...

Android

Asus durante la MWC 2013 presento el increíble Asus Fonepad que incluía un novedoso procesador Intel Atom Z2420 a 1,2 GHz y 16 GB...